Methods of Applying Paint and Coating Products- Before using paint and coating products, it is better to understand the type of paint or coating that will be applied, how to prepare the surface, and learn the application methods. Using the appropriate application method shall give maximum result and satisfactory outcomes. Adequate surface preparation is crucial before applying paint. Most failures in paint and coating applications occur due to insufficient surface preparation. Following the correct methods will also ensure durability and optimal results. There are several popular methods used in paint and coating application. In this article, we will discuss some methods of applying paint and coating that you can use to achieve the best results!

1. Brush Method

The brush method is a traditional approach in paint and coating application. Although considered traditional, it is still widely used, especially for small surfaces such as house fences. Personal or home painting projects often employ this method. The paint or coating is applied using a brush with regular and even strokes. The bristles of the brush facilitate proper penetration into the surface being painted. The brush method is suitable for applying base or primer coats due to its penetration ability. By using this method, the risk of material loss is only around 5%, and there is minimal pollution during application. However, it requires more time to execute. Sufficient practice and training are needed to achieve an even coat using a brush. The brush strokes may result in visible brush marks.

2. Roll Method

The roll method involves applying liquid paint or coating using a roller. It is commonly used for painting large surfaces such as house walls. Compared to the brush method, the roll method allows for faster application. The material loss is around 5%, and pollution during application is minimal. There are two types of rollers: one for water-based paint and another for solvent-based paint, often referred to as "oil-based paint." Using a roller also requires practice and training to achieve an even and smooth coat. However, the roll method may result in a less smooth surface and leave roller marks from the roller fibers, particularly with water-based paint.

3. Spraying Method

There are various spraying methods associated with the spraying equipment used, such as Air Spray, Airless Spray, and Electrostatic Spray. In this case, we will focus on the Air Spray method. This method is widely used across different industries. The equipment used is an Air Spraygun that requires compressed air during the painting process. The method is commonly employed in factories, such as furniture manufacturing or body repair workshops. Nowadays praying methods are extensively used in residential areas for painting doors, frames of door and windows, kitchen cabinets, and more. The advantage of the spray method is that it provides faster and smoother results. However, the material loss is relatively high, around 30%, and there is significant air pollution due to the fine spray particles. This method is often used for painting solvent-based coatings. It is suitable for flat small and  large surface painting projects.

4. Dipping Method

Next is the dipping method. As the name suggests, this method involves immersing the object to be painted and coated directly into a container or tank filled with liquid paint and coating. The object is dipped and soaked in the liquid paint or coating until the entire surface is coated with paint or coating. It can be said that this method appears easier compared to others because it can cover hard-to-reach areas. It is commonly used for painting or coating small objects. The material loss is around 5%, and pollution during application is very low. The final result of the painting depends on the paint or coating material used, but it tends to be smooth. This method is only used in specific industries.

Each method of applying paint and coating products has its own purposes and advantages. Therefore, when choosing a method to use, you need to consider factors such as the type of product, characteristics, and the surface material to be coated with paint and coating.

Adequate surface preparation is crucial before applying paint. Most failures in paint and coating applications occur due to insufficient surface preparation. By understanding various methods of applying paint and coating, you can make your work more effective and efficient.

Are you ready to showcase your innovations in the world of paints and coatings? 

Join us at Coating Show Indonesia 2025 – the premier event for the coatings industry. It’s the perfect platform to network, gain exposure, and connect with potential customers and partners. Don’t miss your chance to book a booth and be part of the leading trade show in Southeast Asia!

Date: 16-18 July 2025

Location: Jakarta Convention Center

Book your booth now at https://coatingshow.com/ and be a part of the biggest industry